DevoNatural® Finish

Parquet varnish


Colourless water-based satin varnish, wear resistant, polyurethane-acrylic based, with UV filter.


DevoNatural Finish satijn - Kleurloze, slijtvaste satijn parketvernis op basis van watergedragen polyurethaan-acrylaat met UV-blokker. This water-based interior finish hardly changes the colour of the wood. It is elastic, sealant and gives all unstained wooden floors and various types of unstained parquet a “natural soft silk-like sheen”. The product can also be used on practically all wood types, and parquet floors that have been stained using DevoNatural Colour. Indoors, DevoNatural Finish Satin can also be applied to wooden doors, furniture, ceilings, etc.

EC2 GB black emmissions dans l air a plus

  • Fast drying;
  • Seamless finish;
  • Hardly changes the colour of the wood;
  • Easy to use;
  • UV filter, anti-yellowing;
  • Solvent-free;
  • No unpleasant odours.
Special characteristics: Transparent finish, wear resistant and elastic, seals the parquet and gives it a natural soft silk-like sheen, with all the comfort of a varnished floor! Wear resistant + easy maintenance. The floor can first be stained using DevoNatural Colour.



Surface preparation: The surface must be dry, thoroughly cleaned and free of grease, oil, wax and dust.

Product preparation: Shake well and stir before use.


Application: Using a short nap varnish or lacquer roller, brush or pistol.

Using a varnish/lacquer roller/brush: Always apply in 60 - 80 cm wide strokes. Start by applying with a brush to the sides, then use the roller - first at right-angles to the grain, before applying uniformly in the direction of the grain (longitudinal grain). Allow the strokes to merge. Apply minimum 3 coats.

Airless pistol: nozzle/nozzle orifice: 0.2 – 0.3; pressure: 80 – 120 bar.

Air pistol: nozzle/nozzle orifice: 1 – 2 mm; pressure: 2 – 3 bar.

Finish: After 5 - 6 hours, sand by hand or using a rotating machine. Sand after the first coat using a 150 grit sanding disc. Between the 2nd and 3rd coat, sand using a 220 grit sanding disc.

Dry enough to walk on: After 4 hours.

Fully dry after: 7 days.

Working temperature: Do not apply at temperatures below 12°C or above 25°C.

Consumption: 10 - 14 m²/litre per coat, 3 coats.

Clean tools: Using water.

Maintenance: 3 weeks after applying the finish coat, using DevoNatural Soft Cleaner and DevoNatural Polish. See also the DevoNatural maintenance sheets for varnished floors.

Shelf life: Minimum 1 year, if kept in properly sealed packaging. Protect against frost and high temperatures.


100 ml, 750 ml, 2 L and 10 L


Technical data sheet DevoNatural Finish Satin