Search
Shopping cart
DevoNatural

DevoNatural Finish Satin 100 ml

Article number DV01454S04
EAN-number 5411634865920
In stock

Opties

  • De beste producten
  • De beste producten
  • De beste producten

Description

Wear resistant colourless satin, aqueous polyurethane-acrylic based, with UV filter.

This water-based interior finish hardly changes the colour of the wood. It is elastic, sealant and gives unstained wooden floors a “satin” look. In addition, it can also be used on practically all wood types..

Indoors, DevoNatural Finish Satin can also be applied to wooden doors, furniture, ceilings, etc.

  • Fast drying;
  • Seamless finish;
  • Hardly changes the colour of the wood;
  • Easy to use;
  • UV filter, anti-yellowing;
  • Solvent-free;
  • No unpleasant odours.

Special characteristics: Transparent finish, wear resistant and elastic, seals the parquet and gives it a “soft satin” appearance with all the comfort of a varnished floor! 

Surface preparation: The surface must be dry, thoroughly cleaned and free of grease, oil, wax and dust.

Product preparation: Shake well and stir before use.

Surface preparation: The surface must be dry, thoroughly cleaned and free of grease, oil, wax and dust.

Product preparation: Shake well and stir before use.

Application: Using a short nap varnish or lacquer roller, brush or pistol.

Using a varnish/lacquer roller/brush: Always apply in 60 - 80 cm wide strokes. Start by applying with a brush to the sides, then with the roller pass first right-angled to the grain, before applying uniformly in the direction of the grain (longitudinal grain). Allow the strokes to merge. Apply minimum 3 coats.

Airless pistol: nozzle/nozzle orifice: 0.2 – 0.3; pressure: 80 – 120 bar.

Air pistol: nozzle/nozzle orifice: 1 – 2 mm; pressure: 2 – 3 bar.

Finish: After 5 - 6 hours, sand by hand or using a rotating machine. Sand after the first coat using a 150 grit sanding disc. Between the 2nd and 3rd coat, sand using a 220 grit sanding disc.

Dry enough to walk on: After 4 hours.

Full curing time: 7 days

Working temperature: Do not apply at temperatures below 12°C, or above 25°C.

Consumption: 10 - 14 m²/litre per coat, 3 coats.

Clean tools: Using water.

Maintenance: 3 weeks after applying the finish coat, using DevoNatural Fresh and Clean and DevoNatural Polish. See also the DevoNatural maintenance sheets for varnished floors.

Shelf life: Minimum 1 year if kept in properly sealed packaging. Protect against frost and high temperatures.

Specificaties